Ge-industrial-solutions AF-600 FP OPCMBTCP Modbus TCP Option Uživatelský manuál stáhnout pdf (Strana 36)

O-10 Control Word Profile

Select the interpretation of the control and status words corresponding to the installed network. Only the selections valid for the network installed in slot A will

be visible in the Keypad display.

For guidelines in selection of GE Drive profile [0] please refer to the Serial communication via RS 485 Interface section.

Option: Function:

[0] * Drive Profile

O-13 Configurable Status Word STW

Option: Function:

This parameter enables configuration of bits 12 – 15 in the status word.

[0] No function

[1] * Profile Default Function corresponds to the profile default selected in par. O-10 Control Word Profile.

[2] Alarm 68 Only Only set in case of an Alarm 68.

[3] Trip excl Alarm 68 Set in case of a trip, except if the trip is executed by an Alarm 68.

[16] T37 DI status The bit indicates the status of terminal 37.

“1” indicates T37 is high (normal)

only available in AF-650 GP.

O-14 Configurable Control Word CTW

Option: Function:

Selection of control word bit 10 if it is active low or active high

[0] None

[1] * Profile default

[2] CTW Valid, active low

O-50 Coasting Select

Option: Function:

Select control of the coasting function via the terminals (digital input) and/or via the network.

[0] Digit Input Activates command via a digital input.

[1] Bus Activates command via the serial communication port or network option module.

[2] Logic AND Activates command via the network/serial communication port, AND additionally via one of the digital

inputs.

[3] * Logic OR Activates command via the network/serial communication port OR via one of the digital inputs.

NB!

This parameter is active only when par. O-01 Control Site is set to [0] Digital and control word.

O-51 Quick Stop Select

Select control of the Quick Stop function via the terminals (digital input) and/or via the network.

Option: Function:

[0] Digital Input

[1] Bus

[2] Logic AND

[3] * Logic OR

NB!

This parameter is active only when par. O-01 Control Site is set to [0] Digital and control word.

Modbus TCP

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 53 54

Komentáře k této Příručce

Žádné komentáře

Ge-industrial-solutions AF-600 FP OPCMBTCP Modbus TCP Option Uživatelský manuál Strana 36

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Ge-industrial-solutions AF-600 FP OPCMBTCP Modbus TCP Option