Ge-industrial-solutions AF-600 FP OPCMBTCP Modbus TCP Option Uživatelský manuál stáhnout pdf (Strana 40)

EN-13 Link Speed

Option: Function:

Forces the link speed for each port in 10 or 100 Mbps. If par. EN-12 is set to: ON, this parameter is read

only and displays the actual link speed. “None” is displayed if no link is present.

[0] * None

[1] 10 Mbps

[2] 100 Mbps

EN-14 Link Duplex

Option: Function:

Forces the duplex for each port to Full or Half duplex. If par. EN-12 is set to: ON, this parameter is read

only.

[0] Half duplex

[1] * Full duplex

EN-21 Process Data Config Write

Range: Function:

[[0 - 9] PCD read 0 - 9] Configuration of readable process data.

NB!

For configuration of 2-word (32-bit) parameter read/write, use 2 consecutive arrays in par. EN-21 and EN-22.

EN-22 Process Data Config Read

Range: Function:

[[0 - 9] PCD read 0 - 9] Configuration of readable process data.

EN-28 Store Data Values

Option: Function:

This parameter activates a function that stores all parameter values in the non-volatile memory (EEPROM)

thus retaining parameter values at power-down.

The parameter returns to “Off”.

[0] * Off The store function is inactive.

[1] Store All set-ups All parameter value will be stored in the non-volatile memory, in all four setups.

EN-29 Store Always

Option: Function:

Activates function that will always store received parameter data in non-volatile memory (EEPROM).

[0] * Off

[1] On

Modbus TCP

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 53 54

Žádné komentáře

Ge-industrial-solutions AF-600 FP OPCMBTCP Modbus TCP Option Uživatelský manuál Strana 40